• <tr id="g40sy"><xmp id="g40sy">
    <tr id="g40sy"><noscript id="g40sy"></noscript></tr><samp id="g40sy"></samp>
    <tr id="g40sy"></tr>
    <samp id="g40sy"><wbr id="g40sy"></wbr></samp>
    <tr id="g40sy"><xmp id="g40sy">
    设计与制程能力
    Item 2017 2018 2019
    Muti-layer
    Muti-layer
    8 10 10
    Inner Layer Registration
    0.075mm 0.05mm 0.05mm
    Thickness         Rigid-Flex               0.25~2.0mm 0.25~2.0mm 0.25~2.0mm
    FPC                              0.05~0.5mm 0.05~0.5mm 0.05~0.5mm
    Min. Trace Width/Space
    S/S &D/S Trace width/space
    45/45μm 35/35μm 30/30μm
    Annular Ring
    0.075mm 0.05mm 0.05mm
    Impedance control
    0.1 0.08 0.08
    Drilling
    Drilled through-hole via diameter:Mechanical Drill
    0.1mm 0.1mm  0.1mm 
    CVL
    CVL Registration
    0.1mm 0.05mm 0.05mm
    LPI
    LPI Opening
    0.20mm 0.20mm 0.20mm
    Solder dam
    0.1mm 0.1mm 0.1mm
    LPI Registration
    50μm 30μm 30μm
    Printing 
    Printing shift
    0.200mm 0.150mm 0.150mm
    Item 2017 2018 2019
    SMT
    Connector pitch
    0.350mm 0.300mm 0.300mm
    Smallest Component

    01005

    01005

    01005
    Stiffener
    Stiffener Registration
    0.200mm 0.100mm 0.100mm
    Punch
    The tolerance With Two Time Punch
    Min ±0.1 Min ±0.1 Min ±0.1
     Finger Outline                0.05mm 0.05mm 0.05mm
    Finger Skewing              0.07mm 0.05mm 0.05mm
    Scoop Molding     Scoop Molding Tolerance    0.075mm 0.075mm 0.075mm
     E.T.
    4-Wire
    Y Y Y

    Surface Treatment
    Ni-Au Plating  Ni:1.25~3.75um     Range 2.5
           3.75~10um      Range 3.75  
      Au:0.025~0.125um   Range 0.075
    Thick Au-plating
      Au:0.15~0.25um     Range 0.125
       0.25~0.75um     Range 0.2
    Immersion Au-Plating
                     Ni:1.25~6.25um     Range 2 
     Au:0.025~0.1um     Range 0.075
    ENEPIG
    Ni:>3um
    Pd?#28023;?.1um
    Au?#28023;?.05um
    OSP 0.2~0.5um
    黑龙江十一选五升级